.410 5/8oz TSS/Steel Duplex Patterns

Duck and Goose hunting

Moderator: hawglips

bullet225ho
Posts: 40
Joined: Wed Nov 22, 2017 7:26 pm

.410 5/8oz TSS/Steel Duplex Patterns

Postby bullet225ho » Sun Sep 16, 2018 9:52 pm

Hey folks,

Finished up TSS trap and thought I'd try it out.

3" TSS/Steel duplex loads...hoping to open pattern up on the little 410. 30" circle at 30yds.

first load is Win AA-HS 4/8oz 8.5 TSS and 1/8oz 5 steel. I use TPS wad and reduced charge of H110 from
BPI load 120216-3711-4

AA-HS8.5tss5steel1.jpg


Second is Cheddite 3" hull with TPS wad...1/2oz 8.5 TSS and 1/8oz 4 steel. This was a reduced charge from BPI 120217-3715-6 using 410 powder. 1290 fps.
cheddite8.5tss4steel.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by bullet225ho on Mon Sep 17, 2018 1:00 pm, edited 1 time in total.



Dave in AZ
Posts: 125
Joined: Thu Mar 10, 2016 1:38 pm

Re: .410 5/8oz TSS/Steel Duplex Patterns

Postby Dave in AZ » Mon Sep 17, 2018 12:18 pm

Great info thx! May want to edit your post to fix the 3/4oz of tss listed to 2/4oz which is what you used I think?
Which one do you like better? Im thinking 2nd one spread out better for 30 yds? Also did you get a speed on first one?



bullet225ho
Posts: 40
Joined: Wed Nov 22, 2017 7:26 pm

Re: .410 5/8oz TSS/Steel Duplex Patterns

Postby bullet225ho » Mon Sep 17, 2018 12:59 pm

Thanks for the Type O catch Dave. fixed it.

The Cheddite shot looks a little better to me. I'm going to try some more things today. It was almost dusk when I shot so my Chrono wasn't reading the best.

Today I want to get a couple more 3" loads, may try the Rio hulls out with cut down tps and also see what some 2 1/2" loads might do. I've got some data from Hal on the 2 1/2 for reference.

Also, these are shot form the Tristar G2 410 with 26" barrel and improve cyl factory tube.



bullet225ho
Posts: 40
Joined: Wed Nov 22, 2017 7:26 pm

Re: .410 5/8oz TSS/Steel Duplex Patterns

Postby bullet225ho » Thu Sep 20, 2018 12:19 am

Some more patterns. This time with 10 TSS and 4 Steel

Cheddite 3" hull, TPS wad, Lil Gun powder and cork spacer on top (needed for proper crimp) 30yds, 30" circle 1160fps

410-58tssdplxlilguncorktop116030yds.jpg


Second shot is Cheddite 3" hull, TPS wad, H-110 powder no spacer...all shot. 30yds, 30" circle 1330 fps

410cheddite58tssdplx1330fps3yds.jpg
You do not have the required permissions to view the files attached to this post.



hawglips
Posts: 333
Joined: Fri Feb 19, 2016 4:56 pm

Re: .410 5/8oz TSS/Steel Duplex Patterns

Postby hawglips » Thu Sep 20, 2018 10:54 am

Are those still the Improved Cylinder?

How did you stack the shot?



bullet225ho
Posts: 40
Joined: Wed Nov 22, 2017 7:26 pm

Re: .410 5/8oz TSS/Steel Duplex Patterns

Postby bullet225ho » Thu Sep 20, 2018 1:37 pm

yes improved cyl. TSS on bottom.



hawglips
Posts: 333
Joined: Fri Feb 19, 2016 4:56 pm

Re: .410 5/8oz TSS/Steel Duplex Patterns

Postby hawglips » Fri Sep 21, 2018 8:25 am

With the 10s, you've got a better ballistics match for the steel 4s, plus a better looking pattern.

I'd be tempted to try a skeet or cylinder....



bullet225ho
Posts: 40
Joined: Wed Nov 22, 2017 7:26 pm

Re: .410 5/8oz TSS/Steel Duplex Patterns

Postby bullet225ho » Fri Sep 21, 2018 11:19 am

been looking for those chokes online. Will have cylinder for sure and prob go ahead and get skeet also just to have it.




Return to “Waterfowl”

Who is online

Users browsing this forum: CommonCrawl [Bot], Jraducks and 0 guests